Semirremolque plataforma Fliegl SDS390 nuevo
- 01/01/2026
- Fliegl
- 07819 Triptis
|
Información principal
|
|
|---|---|
| Ref. cliente : | Produktpalette |
| Ref. web : | 11509121 |
| Carrocería | Plataforma |
| Marca | Fliegl |
| Gama (marca : Fliegl) | SDS390 |
| Estado | Nuevo |
| Año | 2026 |
| Fecha 1ª matriculación | 01/01/2026 |
| País | ALEMANIA |
| Constructor | Fliegl |
Caja de cambios y transmisión |
|
|---|---|
| Precisiones caja de cambios | Boîte automatique |
Equipamiento Semirremolque Fliegl |
|
|---|---|
|
Neumáticos |
|
|---|---|
| Estado y dimensiones de los neumáticos | 100 % |
Suspensión / Ejes |
|---|
|
Comentarios |
|---|
|
Localisation :
• Allemagne Triptis Carrosserie : • longueur - 13 m, largeur - 2,48 m Informations supplémentaires : • bleu foncé Description: Semi-Trailer Platform Functionality: fully functional Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland Container locking: 4 pairs of twist locks recessed in the floor for 2 x 20 ft or 1 x 40 ft containers 2 ride heights, adjustable via hand button: 1 x for coupling height 1120 mm, 1 x for coupling height 1200 mm "Crash-Blocker": steel impact protection internally at the bottom, approx. 140 mm high Achsenkonfiguration: 3 axles Bespoke Transport Solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are carried out individually to customer requirements #Chassis – Haulage Semi-Trailer Fine-grain steel welded construction Fifth wheel plate with replaceable 2" kingpin Mounting position for warning boards at the rear Outer frame with "Load-Lock-Profil" for lashing strap attachment 24 t twin-speed landing legs single-side operation Ferry lashing eyes marked yellow incl. 2 at the rear as tow eyes Stake pockets recessed in the outer frame 80 x 80 mm internal size Stake pockets recessed centrally in the floor 80 x 80 mm internal size Removable stakes W=80/D=80/L=1200 mm hot-dip galvanised Lashing rings recessed in the outer frame 5 t each 2 tool boxes W approx. 1230 / H approx. 450 mm enclosed fitted across the full width ahead of the axles in place of side underrun protection foremost lock insertable as pin type Cross lashing/stake rails recessed in the floor across the full width to the outer frame approx. 100 mm high with 20 mm round steel bars top and bottom spacing approx. 60 mm closed at the bottom with an angle plate open downward on one half for lashing and inserting 80 x 80 mm stakes Open compartment for warning boards subject to technical feasibility #Axles + Suspension SAF disc-brake axles laser-measured axle/chassis assembly to reduce tyre wear and fuel consumption incl. forced lowering and start-off aid activated by braking 3 times #Braking System Two-line air braking system Colour-coded pipework for easy servicing Spring-brake parking brake 2 anti-mismatch coupling heads at the front EBS electronic braking system with EBS socket at the front Lift-and-lower valve Vehicle stability system #Wheels and Tyres 385/65 R 22.5" steel wheels factory silver #Electrics 24 volt 4 x three-chamber lights side-mounted yellow LED lighting 2 white LED front position lights 2 white/red LED outline marker lights at the rear 2 x 7-pin and 1 x 15-pin anti-mismatch sockets at the front without connecting cable Beacon light with bracket switched via side lights (lamp removable) 2 pairs of warning boards double LED-illuminated extendable to 4500 mm and removable via plug connector with additional bracket at the rear Additional 7-pin socket (to ISO 1724) in the rear underrun protection #Floor Screen-printed plywood flooring approx. 30 mm thick cross joints with omega insert on longitudinal bearers for high point-load capacity forklift axle load up to 7100 kg max #Front Wall / Front Corner Posts 25 mm aluminium hollow profile 1650 mm high Corner posts in solid steel design Nws Dp Djzb Iu Djy Axek Front wall additionally fitted internally with 1250 mm high screen-printed plywood panel Storage compartment for 80 x 80 mm removable stakes inside the front wall |
|
Ver todo
|
Comentarios |
|---|
|
Localisation : • Allemagne Triptis Carrosserie : • longueur - 13 m, largeur - 2,48 m Informations supplémentaires : • bleu foncé Description: Semi-Trailer Platform Functionality: fully functional Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland Container locking: 4 pairs of twist locks recessed in the floor for 2 x 20 ft or 1 x 40 ft containers 2 ride heights, adjustable via hand button: 1 x for coupling height 1120 mm, 1 x for coupling height 1200 mm "Crash-Blocker": steel impact protection internally at the bottom, approx. 140 mm high Achsenkonfiguration: 3 axles Bespoke Transport Solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are carried out individually to customer requirements #Chassis – Haulage Semi-Trailer Fine-grain steel welded construction Fifth wheel plate with replaceable 2" kingpin Mounting position for warning boards at the rear Outer frame with "Load-Lock-Profil" for lashing strap attachment 24 t twin-speed landing legs single-side operation Ferry lashing eyes marked yellow incl. 2 at the rear as tow eyes Stake pockets recessed in the outer frame 80 x 80 mm internal size Stake pockets recessed centrally in the floor 80 x 80 mm internal size Removable stakes W=80/D=80/L=1200 mm hot-dip galvanised Lashing rings recessed in the outer frame 5 t each 2 tool boxes W approx. 1230 / H approx. 450 mm enclosed fitted across the full width ahead of the axles in place of side underrun protection foremost lock insertable as pin type Cross lashing/stake rails recessed in the floor across the full width to the outer frame approx. 100 mm high with 20 mm round steel bars top and bottom spacing approx. 60 mm closed at the bottom with an angle plate open downward on one half for lashing and inserting 80 x 80 mm stakes Open compartment for warning boards subject to technical feasibility #Axles + Suspension SAF disc-brake axles laser-measured axle/chassis assembly to reduce tyre wear and fuel consumption incl. forced lowering and start-off aid activated by braking 3 times #Braking System Two-line air braking system Colour-coded pipework for easy servicing Spring-brake parking brake 2 anti-mismatch coupling heads at the front EBS electronic braking system with EBS socket at the front Lift-and-lower valve Vehicle stability system #Wheels and Tyres 385/65 R 22.5" steel wheels factory silver #Electrics 24 volt 4 x three-chamber lights side-mounted yellow LED lighting 2 white LED front position lights 2 white/red LED outline marker lights at the rear 2 x 7-pin and 1 x 15-pin anti-mismatch sockets at the front without connecting cable Beacon light with bracket switched via side lights (lamp removable) 2 pairs of warning boards double LED-illuminated extendable to 4500 mm and removable via plug connector with additional bracket at the rear Additional 7-pin socket (to ISO 1724) in the rear underrun protection #Floor Screen-printed plywood flooring approx. 30 mm thick cross joints with omega insert on longitudinal bearers for high point-load capacity forklift axle load up to 7100 kg max #Front Wall / Front Corner Posts 25 mm aluminium hollow profile 1650 mm high Corner posts in solid steel design Nws Dp Djzb Iu Djy Axek Front wall additionally fitted internally with 1250 mm high screen-printed plywood panel Storage compartment for 80 x 80 mm removable stakes inside the front wall |
|
Información principal
|
|
|---|---|
| Ref. cliente : | Produktpalette |
| Ref. web : | 11509121 |
| Carrocería | Plataforma |
| Marca | Fliegl |
| Gama (marca : Fliegl) | SDS390 |
| Estado | Nuevo |
| Año | 2026 |
| Fecha 1ª matriculación | 01/01/2026 |
| País | ALEMANIA |
| Constructor | Fliegl |
Caja de cambios y transmisión |
|
|---|---|
| Precisiones caja de cambios | Boîte automatique |
Equipamiento Semirremolque Fliegl |
|
|---|---|
|
Neumáticos |
|
|---|---|
| Estado y dimensiones de los neumáticos | 100 % |
Suspensión / Ejes |
|---|
|
Comentarios |
|---|
|
Localisation :
• Allemagne Triptis Carrosserie : • longueur - 13 m, largeur - 2,48 m Informations supplémentaires : • bleu foncé Description: Semi-Trailer Platform Functionality: fully functional Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland Container locking: 4 pairs of twist locks recessed in the floor for 2 x 20 ft or 1 x 40 ft containers 2 ride heights, adjustable via hand button: 1 x for coupling height 1120 mm, 1 x for coupling height 1200 mm "Crash-Blocker": steel impact protection internally at the bottom, approx. 140 mm high Achsenkonfiguration: 3 axles Bespoke Transport Solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are carried out individually to customer requirements #Chassis – Haulage Semi-Trailer Fine-grain steel welded construction Fifth wheel plate with replaceable 2" kingpin Mounting position for warning boards at the rear Outer frame with "Load-Lock-Profil" for lashing strap attachment 24 t twin-speed landing legs single-side operation Ferry lashing eyes marked yellow incl. 2 at the rear as tow eyes Stake pockets recessed in the outer frame 80 x 80 mm internal size Stake pockets recessed centrally in the floor 80 x 80 mm internal size Removable stakes W=80/D=80/L=1200 mm hot-dip galvanised Lashing rings recessed in the outer frame 5 t each 2 tool boxes W approx. 1230 / H approx. 450 mm enclosed fitted across the full width ahead of the axles in place of side underrun protection foremost lock insertable as pin type Cross lashing/stake rails recessed in the floor across the full width to the outer frame approx. 100 mm high with 20 mm round steel bars top and bottom spacing approx. 60 mm closed at the bottom with an angle plate open downward on one half for lashing and inserting 80 x 80 mm stakes Open compartment for warning boards subject to technical feasibility #Axles + Suspension SAF disc-brake axles laser-measured axle/chassis assembly to reduce tyre wear and fuel consumption incl. forced lowering and start-off aid activated by braking 3 times #Braking System Two-line air braking system Colour-coded pipework for easy servicing Spring-brake parking brake 2 anti-mismatch coupling heads at the front EBS electronic braking system with EBS socket at the front Lift-and-lower valve Vehicle stability system #Wheels and Tyres 385/65 R 22.5" steel wheels factory silver #Electrics 24 volt 4 x three-chamber lights side-mounted yellow LED lighting 2 white LED front position lights 2 white/red LED outline marker lights at the rear 2 x 7-pin and 1 x 15-pin anti-mismatch sockets at the front without connecting cable Beacon light with bracket switched via side lights (lamp removable) 2 pairs of warning boards double LED-illuminated extendable to 4500 mm and removable via plug connector with additional bracket at the rear Additional 7-pin socket (to ISO 1724) in the rear underrun protection #Floor Screen-printed plywood flooring approx. 30 mm thick cross joints with omega insert on longitudinal bearers for high point-load capacity forklift axle load up to 7100 kg max #Front Wall / Front Corner Posts 25 mm aluminium hollow profile 1650 mm high Corner posts in solid steel design Nws Dp Djzb Iu Djy Axek Front wall additionally fitted internally with 1250 mm high screen-printed plywood panel Storage compartment for 80 x 80 mm removable stakes inside the front wall |
|
Ver todo
|
Comentarios |
|---|
|
Localisation : • Allemagne Triptis Carrosserie : • longueur - 13 m, largeur - 2,48 m Informations supplémentaires : • bleu foncé Description: Semi-Trailer Platform Functionality: fully functional Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland Container locking: 4 pairs of twist locks recessed in the floor for 2 x 20 ft or 1 x 40 ft containers 2 ride heights, adjustable via hand button: 1 x for coupling height 1120 mm, 1 x for coupling height 1200 mm "Crash-Blocker": steel impact protection internally at the bottom, approx. 140 mm high Achsenkonfiguration: 3 axles Bespoke Transport Solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are carried out individually to customer requirements #Chassis – Haulage Semi-Trailer Fine-grain steel welded construction Fifth wheel plate with replaceable 2" kingpin Mounting position for warning boards at the rear Outer frame with "Load-Lock-Profil" for lashing strap attachment 24 t twin-speed landing legs single-side operation Ferry lashing eyes marked yellow incl. 2 at the rear as tow eyes Stake pockets recessed in the outer frame 80 x 80 mm internal size Stake pockets recessed centrally in the floor 80 x 80 mm internal size Removable stakes W=80/D=80/L=1200 mm hot-dip galvanised Lashing rings recessed in the outer frame 5 t each 2 tool boxes W approx. 1230 / H approx. 450 mm enclosed fitted across the full width ahead of the axles in place of side underrun protection foremost lock insertable as pin type Cross lashing/stake rails recessed in the floor across the full width to the outer frame approx. 100 mm high with 20 mm round steel bars top and bottom spacing approx. 60 mm closed at the bottom with an angle plate open downward on one half for lashing and inserting 80 x 80 mm stakes Open compartment for warning boards subject to technical feasibility #Axles + Suspension SAF disc-brake axles laser-measured axle/chassis assembly to reduce tyre wear and fuel consumption incl. forced lowering and start-off aid activated by braking 3 times #Braking System Two-line air braking system Colour-coded pipework for easy servicing Spring-brake parking brake 2 anti-mismatch coupling heads at the front EBS electronic braking system with EBS socket at the front Lift-and-lower valve Vehicle stability system #Wheels and Tyres 385/65 R 22.5" steel wheels factory silver #Electrics 24 volt 4 x three-chamber lights side-mounted yellow LED lighting 2 white LED front position lights 2 white/red LED outline marker lights at the rear 2 x 7-pin and 1 x 15-pin anti-mismatch sockets at the front without connecting cable Beacon light with bracket switched via side lights (lamp removable) 2 pairs of warning boards double LED-illuminated extendable to 4500 mm and removable via plug connector with additional bracket at the rear Additional 7-pin socket (to ISO 1724) in the rear underrun protection #Floor Screen-printed plywood flooring approx. 30 mm thick cross joints with omega insert on longitudinal bearers for high point-load capacity forklift axle load up to 7100 kg max #Front Wall / Front Corner Posts 25 mm aluminium hollow profile 1650 mm high Corner posts in solid steel design Nws Dp Djzb Iu Djy Axek Front wall additionally fitted internally with 1250 mm high screen-printed plywood panel Storage compartment for 80 x 80 mm removable stakes inside the front wall |
Semirremolque plataforma t3 3 Achs Satteltieflader Mega
Semirremolque plataforma Fliegl nuevo 3-Achs Mega Gardine zum Aufbau
Semirremolque plataforma transporte de bebidas Kempf SP 35/3*SAF*Schiebeplane*Hubdach*
Semirremolque plataforma Kaiser Robuste KA nr. CS-905-GW